Suture anchor fixation may be an alternative to tension band wiring in olecranon fractures: Finite element analysis

Tolgahan Kuru, İbrahim Mutlu

Issue: 2020, Volume 31 - Issue 2 Pages: 238-245 DOI: 10.5606/ehc.2020.73586
4165 4702

Does mini-midvastus approach have an advantageous effect on rapid recovery protocols over medial parapatellar approach in total knee arthroplasty?

Hakan Zora, Harun R. Güngör, Gökhan Bayrak, Raziye Şavkın, Nihal Büker

Issue: 2020, Volume 31 - Issue 3 Pages: 571-581 DOI: 10.5606/ehc.2020.76387
3052 5720

The importance of Böhler’s angle in calcaneus geometry: A finite element model study

Alper Gültekin, Erdinç Acar, Levent Uğur, Aytaç Yıldız, Ulaş Serarslan

Issue: 2021, Volume 32 - Issue 2 Pages: 420-427 DOI: 10.52312/jdrs.2021.81251
4751 3047

Traction therapy in lumbar disc hernias: A finite element analysis study

Erol Öten, Osman Civan, Levent Uğur

Issue: 2022, Volume 33 - Issue 1 Pages: 086-092 DOI: 10.52312/jdrs.2022.516
10285 2418

Influence of the femoral entry point for intramedullary alignment in total knee arthroplasty: A computer-aided design approach

Christoph Stotter, Erich Reiter, Werner Schretter, Philippe Reuter, Stefan Nehrer, Thomas Klestil

Issue: 2022, Volume 33 - Issue 2 Pages: 294-302 DOI: 10.52312/jdrs.2022.645
3674 3507

Comparative finite element analysis of four different internal fixation implants for Pauwels type III femoral neck fractures in various fracture angles in the sagittal plane

Alaettin Özer, Kerim Öner, Ahmet Emin Okutan, Muhammet Salih Ayas

Issue: 2022, Volume 33 - Issue 2 Pages: 352-358 DOI: 10.52312/jdrs.2022.676
3925 2540

Can a coracoclavicular screw added to the clavicular hook plate reduce subacromial stress? A finite element analysis

Mert Kumbaracı, Alaettin Özer, Muhammet Bozoğlan, Ali Turgut

Issue: 2022, Volume 33 - Issue 3 Pages: 609-615 DOI: 10.52312/jdrs.2022.837
3010 2153

Comparison of different internal fixation implants in the treatment of talar neck fractures: A finite element analysis

Xin Fu, Hong-Bin Cao, Nan Li, Gui-Xin Wang, Jin-Quan He

Issue: 2024, Volume 35 - Issue 1 Pages: 027-035 DOI: 10.52312/jdrs.2023.1280
3600 3200

Quantitative analysis of protective Kirschner wire diameters in lateral opening wedge distal femoral osteotomy: A finite element study

Alican Baris, Emre Özmen, Esra Circi, Serdar Yuksel, Ozan Beytemür

Issue: 2025, Volume 36 - Issue 1 Pages: 097-106 DOI: 10.52312/jdrs.2025.1806
2621 1926

Does the gap balance technique really elevate the joint line in total knee arthroplasty? A single-center, randomized study

Özgür Avci, Alpaslan Öztürk, Yavuz Akalın, Nazan Çevik, Ali Çınar, Hikmet Şahin

Issue: 2025, Volume 36 - Issue 2 Pages: 350-357 DOI: 10.52312/jdrs.2025.2068
3113 1746

Impact of diabetes mellitus and preoperative body mass index on 30-day postoperative complications and readmissions following total knee arthroplasty

Kwong Weng Loh, Suraya Zulkhairi, Khai Hsin Wong, Khairul Anwar Ayob, Veenesh Selvaratnam, Azlina Amir Abbas

Issue: 2025, Volume 36 - Issue 3 Pages: 501-509 DOI: 10.52312/jdrs.2025.2295
3817 2130

Evaluation of the effectiveness of Kirschner wires in preventing lateral hinge fractures in high tibial osteotomy: A finite element analysis

Turgut Emre Erdem, Mustafa Ozkaya, Alper Kırılmaz, Ahmet Saray, Haluk Yaka, Faik Turkmen

Issue: 2025, Volume 36 - Issue 3 Pages: 683-695 DOI: 10.52312/jdrs.2025.2252
2251 1797

Enhanced scaphoid fixation with Kirschner wire: A clinical and finite element study

İbrahim Halil Dadir, Enejd Veizi, Uğur Bezirgan, Mustafa Bilgiç, Şahin Çepni, Erdinç Acar

Issue: 2026, Volume 37 - Issue 1 Pages: 170-179 DOI: 10.52312/jdrs.2026.2414
1591 2440

Reduced lateral hinge stress and fracture risk in double-hinge medial open-wedge high tibial osteotomy: A finite element study

Haluk Yaka, Mustafa Özkaya, Alper Kırılmaz, Turgut Emre Erdem, Mustafa Özer, Faik Türkmen

Issue: 2026, Volume 37 - Issue 1 Pages: 229-237 DOI: 10.52312/jdrs.2026.2458
933 1281

Total knee arthroplasty with “Collar Tightening Technique” for advanced knee osteoarthritis with concurrent chronic posterolateral knee dislocation and lateral patellar dislocation: A case report

Wen-Shuo Chang, Chi-Sheng Chien, Tsung-Mu Wu, Kin-Weng Wong

Issue: 2026, Volume 37 - Issue 2 Pages: 565-571 DOI: 10.52312/jdrs.2026.2569
799 1050

Medial plating versus newly designed intramedullary nail with distal interlocking system for distal tibia fractures: A biomechanical study with finite element analysis

Omer Kays Unal, Mirza Zafer Dagtas, Turan Najafov, Cihan Demir, Ender Ugutmen, Fuat Akpinar

Issue: 2026, Volume 37 - Issue 2 Pages: 477-488 DOI: 10.52312/jdrs.2026.2459
861 764

Evaluating deepresearch and deepthink in total knee arthroplasty patient education: ChatGPT-4o excels in comprehensiveness, Deepseek R1 leads in clarity and readability of orthopedic information

Onur Gultekin, Michael T. Hirschmann, Halil İbrahim Arıkan, Bekir Eray Kilinc, Baris Yilmaz, Süleyman Abul, Jumpei Inoue, Mahmut Enes Kayaalp

Issue: 2026, Volume 37 - Issue 2 Pages: 470-476 DOI: 10.52312/jdrs.2026.2645
945 1379

Comparative biomechanical evaluation of medial support plating in Pauwels type III femoral neck fractures: A finite element analysis

Mahmut Kalem, Malik Kısmet, Mehmet Batu Ertan, Ercan Şahin, Hakan Kocaoğlu

Issue: 2026, Volume 37 - Issue 3 Pages: 677-687 DOI: 10.52312/jdrs.2026.2806
267 262

Effects of proximal fibular osteotomy on tibiofibular and medial knee loads in severe varus: A finite element study

Oğuzhan Pekince, Ahmet Yıldırım

Issue: 2026, Volume 37 - Issue 3 Pages: 800-810 DOI: 10.52312/jdrs.2026.2965
298 282

The influence of design factors on the mechanical properties of biodegradable composite plates: A finite element analysis

Mustafa Buğra Ayaz, Ali Çağrı Tekin, Süreyya Ergün Bozdağ, Serhat Gürbüz, Mehmet Kürşad Bayraktar, Esra Akdaş Tekin

Issue: 2026, Volume 37 - Issue 3 Pages: 851-862 DOI: 10.52312/jdrs.2026.3004
408 274